About the Journal

Published by Karya Ilham Publishing from 2025

The Malaysian Journal on Composites Science and Manufacturing (MJCSM) is the first Malaysian publication in composites science and manufacturing engineering. Featuring research articles, compact reviews, and case studies, the journal covers all fundamental and applied studies on all types of composite materials and all crucial elements of manufacturing engineering (material, process, design, robotics & automation, and industrial engineering).

The journal bridges the crucial gap between fundamental research and industrial R&D on composites and manufacturing engineering, targeting a broad audience of academics, scientists, and industrial researchers such as engineers and technologists.

EVENTS UPDATE

Join us at the 9th International Symposium on Fluid Mechanics and Thermal Sciences (9th-ISFMTS2025), hosted by Semarak Ilmu Sdn. Bhd., on 16th April 2025 at the Everly Hotel, Putrajaya, Malaysia. […] Find out more Join us virtually for the Semarak International Research Innovation Symposium IV (SIRIS IV), hosted by Semarak Ilmu Sdn. Bhd., on 30th April 2025. This exciting event will bring together [...] Find out more The primary aim of this conference is to establish itself as the premier annual gathering in the dynamic realms of Applied Science and Engineering, Advanced Technology, Applied Mechanics, Fluid Mechanics, […] Find out more

Most cited articles (Source: SCOPUS)

Numerical Investigation on Free Vibration Analysis of Kevlar/Glass/Epoxy Resin Hybrid Composite Laminates, Ma Quanjin, M.N.M. Merzuki, M.R.M. Rejab, M.S.M. Sani, Bo Zhang

Design of an Internet of Things Based Electromagnetic Robotic Arm for Pick and Place Applications, Edward Laman, Mohd Nazmin Maslan, Mahasan Mat Ali, Lokman Abdullah, Ruzaidi Zamri, Mohd Syafiq Syed Mohamed, Maslan Zainon, Mohd Samsuddin Noorazizi, Agus Sudianto

Enhancement of Mechanical and Electrical Properties in Graphene Nanoplatelet Modified Nylon 66, Mohammed Iqbal Shueb, Mohd Edeerozey Abd Manaf, Chantara Thevy Ratnam, Noraiham Mohamad, Mahathir Mohamed

Current Issue

Vol. 16 No. 1 (2025): March (2025)
View Vol. 16 No. 1 (2025): March (2025)

EDITOR'S CHOICE

Effect of Metal Filler on the Welded Joint of X70 Steel Joined to Duplex Stainless Steel by Gas Arc Welding

Zakaria Bourmerzoug, Oualid Beziou, Ines Hamdi, François Brisset, Thierry Baudin

Published: 2025-03-20

Research Articles

  • Cover image of Kabir et al.

    Numerical Investigation of Injection Pressure Effect on the Performance and Emission of a Diesel Engine Fueled with Butanol-Diesel Blends

    Md. Radwanul Kabir, Joy Ganguly, Md Sunney-ul-Alam, Sobahan Mia
    1-18
    DOI: https://doi.org/10.37934/mjcsm.16.1.118
  • Cover image of Boumerzoug et al.

    Effect of Metal Filler on the Welded Joint of X70 Steel Joined to Duplex Stainless Steel by Gas Arc Welding

    Zakaria Boumerzoug, Oualid Beziou, Ines Hamdi, François Brisset , Thierry Baudin
    19-34
    DOI: https://doi.org/10.37934/mjcsm.16.1.1934
  • Cover image of Nguyen et al

    Preparation of Antifouling Composite Coating for Rubber. Part 1: Manufacturing and Laboratory Testing

    Thanh Nguyen Trung, Nguyen Ba Ngoc, Truong Dinh Tuan, Hoang Ngoc Phuoc, Nguyen Duc Thanh, Tran Van Quyen, Le Thanh Viet, Nguyen Manh Hao
    35-45
    DOI: https://doi.org/10.37934/mjcsm.16.1.3545
  • The three sections of the dispensary

    Design and Fabrication of a Quick Action Medicine Dispensary

    Alvee Jawad Hamid, Madihah Maharof, Zamberi Jamaludin, Farhan Faisal, Mahedi Hasan, Tarif Shahriar, Rashid Naib Rafi
    46-59
    DOI: https://doi.org/10.37934/mjcsm.16.1.4659
  • Aluminium block, abrasive waterjet machine and surface roughness

    Taguchi Method-Based Optimization of Single-Pass Abrasive Waterjet Cutting of Thick Aluminium

    Hanizam Hashim, Noraiham Mohamad, Nor Bahiyah Baba, Bobbu Umroh
    60-68
    DOI: https://doi.org/10.37934/mjcsm.16.1.6068
  • Heat treatment in NaCl and tensile test specimens

    Effect of Sodium Chloride-Assisted Heat Treatment on Virgin and Recycled PLA Filaments in FDM 3D Printing

    Nurul Izzati Zaidi, Rahimah Abdul Hamid, Fawwaz Asyraf Muhammad Fakri, Amirul Anniq Mohd Yusof, Nurul Wirdah Mafazi, Shajahan Maidin, Teruaki Ito
    69-84
    DOI: https://doi.org/10.37934/mjcsm.16.1.6984
  • HoQ for Material Selection

    Multi-Criteria Decision Analysis for Optimal Material Selection in Unmanned Aerial Vehicle Manufacturing

    Mohd Suhaimi Omar, Wan Hasrulnizzam Wan Mahmood, Noor Irinah Omar, Nur Diyanah Faizal, Nur Azmina Muhammad Haris Ong, Abdurrahman Faris Indriya Himawan
    85-99
    DOI: https://doi.org/10.37934/mjcsm.16.1.8599
  • FESEM images and EDX

    Mechanical Performance of Recycled Polypropylene Composites Reinforced with Activated Carbon-Treated Clay as Concrete Aggregates

    Najatul Athirah Musa, Muthalagu A/L Shanmugam, Noraiham Mohamad, Hairul Effendy Ab Maulod, Jeefferie Abd Razak, Mohd Edeerozey Abd Manaf, Mohammed Iqbal Shueb, Puteri Rabiah Zakyron, Mohd Mustafa Al Bakri Abdullah
    100-110
    DOI: https://doi.org/10.37934/mjcsm.16.1.100110
  • 3D Response Plot

    Parametric Study and Characterization of Nitrogen-Doped Carbon Quantum Dots Synthesized via Hydrothermal Method

    Nurul Ayunni Abdul Latif, Jeefferie Abd Razak, Wan Putri Najihah Zulkarnain, Rose Farahiyan Munawar, Noraiham Mohamad, Intan Sharhida Othman, Poppy Puspitasari
    111-124
    DOI: https://doi.org/10.37934/mjcsm.16.1.111124
View All Issues

Frequency

Three Volumes Yearly (March, July, November)

Article Processing Charges

All articles published in this journal are open access and freely available online, free to download, share and re-use. To cover the cost of providing open access, Akademia Baru charges an Article Processing Charge (APC) once an article is accepted for publication. There are no charges for rejected articles, no submission charges, and no surcharges based on the length of an article, tables, figures or supplementary data.

The APC charged for accepted articles;
RM 5000 (International Corresponding Author) / RM3000  (Malaysian Corresponding Author).