Vol. 13 No. 1 (2024): March (2024)

View Vol. 13 No. 1 (2024): March (2024)

EDITOR'S CHOICE

Work Standardization in Lean Manufacturing for Improvement of Production Line Performance in SME
Md. Shahidul Islam, Shamsuddin Ahmed

Published: 2024-03-27

Research Articles

  • Fabrication and Analysis of Physico-Mechanical Characteristics of Chemically Treated Bhendi Fiber Reinforced Thermoplastic Composites: Effect of UV Radiation

    Haydar Zaman
    1-13
    DOI: https://doi.org/10.37934/mjcsm.13.1.113

  • Thermo-Mechanical, Structural, and Biodegradability Properties of Water Hyacinth and Sheep Wool Fiber Reinforced Hybrid Polypropylene Composites

    Md. Fahim Faisal Chowdhury, Moupia Tajrin Oyshi, Mahbub Hasan
    14-24
    DOI: https://doi.org/10.37934/mjcsm.13.1.1424

  • Corrosion Resistance of Scraped Copper in Velocity Varied Inland Water of Bangladesh

    M Muzibur Rahman, Raisha Hasan Chowdhury, Tahian Ahmed Rafi, S Reaz Ahmed
    25-35
    DOI: https://doi.org/10.37934/mjcsm.13.1.2535

  • Effect of Fiber Content on the Mechanical Properties of Jute Fiber Reinforced Perlite/Gypsum Composites

    Pranto Karua, Md Arifuzzaman, Md Shariful Islam
    36-44
    DOI: https://doi.org/10.37934/mjcsm.13.1.3644

  • Effect of Fiber Orientation and Volume Fraction on Young's Modulus for Unidirectional Carbon Fiber Reinforced Composites: A Numerical Investigation

    Md Sakhawat Hossain, Md Sayed Anwar, Md Shariful Islam, Md Arifuzzaman
    45-54
    DOI: https://doi.org/10.37934/mjcsm.13.1.4554

  • An Innovative Approach to Assess the Potentiality of using Activated Carbon and Rice Husk Ash in Aluminum-Air Battery

    Md. Anayet Ullah Patwari, Arman Hossain, Irteza Maroof, Md. Fahim Mahmud
    55-67
    DOI: https://doi.org/10.37934/mjcsm.13.1.5567

  • Effect of Adhesive Type on the Adhesively Bonded Stepped Joint: A Numerical Investigation

    Md Sayed Anwar, Md Ahatashamul Haque Khan Shuvo, Md Manirul Islam, Md Mehedi Hasan Ziad, Md Ariful Hasan
    82-97
    DOI: https://doi.org/10.37934/mjcsm.13.1.8297

  • Design, Simulation and Fabrication of an Ergonomic Handgrip for Public Transport in Bangladesh

    Afrida Kabir, Faiyaj Kabir, Saief Newaz Chowdhury, A. R. M Harunur Rashid
    98-111
    DOI: https://doi.org/10.37934/mjcsm.13.1.98111

  • The Physicomechanical and Interfacial Properties of the Vetiveria Zizanioides Fiber Reinforced Polymer Composites

    Haydar Zaman
    112-125
    DOI: https://doi.org/10.37934/mjcsm.13.1.112125

  • Synthesis of Hybrid Composites from Bio-Based Fillers: Chicken Feather, Groundnut Shell, Sawdust

    Farhana Afroz, Shamsuddin Ahmed, Md. Abdul Gafur
    126-135
    DOI: https://doi.org/10.37934/mjcsm.13.1.126135

Case Studies

  • Work Standardization in Lean Manufacturing for Improvement of Production Line Performance in SME

    Md. Shahidul Islam, Shamsuddin Ahmed
    68-81
    DOI: https://doi.org/10.37934/mjcsm.13.1.6881