A Comprehensive Review on Tribological Behaviour of Hybrid Nanocellulose-CuO as Nanolubricant for Piston Ring Cylinder Liner Application

Authors

  • Sakinah Muhamad Hisham Faculty of Manufacturing and Mechatronic Engineering Technology, University Malaysia Pahang, 26600, Pekan, Pahang, Malaysia
  • Norazlianie Sazali Faculty of Manufacturing and Mechatronic Engineering Technology, University Malaysia Pahang, 26600, Pekan, Pahang, Malaysia
  • Kumaran Kadirgama Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia
  • Devarajan Ramasamy Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia

DOI:

https://doi.org/10.37934/armne.18.1.6077

Keywords:

Nanocellulose, Copper (II) oxide, nanolubricant, coefficient of friction, wear

Abstract

Friction coefficient and wear rate are crucial performance for the development of nanolubricants, which are of great significance for realizing energy conservation and prolonging service life of mechanical components. Herein, this review systematically describes the progress on nanocellulose (CNC) and Copper (II) oxide (CuO) as effective nanoparticles for developments of nanolubricant as oil additives for improving the anti-friction and wear resistant for piston ring-cylinder liner contact. Additionally, we point out several problems existing in the applications of CuO and CNC additives propose the possible solutions. Finally, the research prospects of CNC-CuO in the field of tribology are prospected.

Author Biographies

Sakinah Muhamad Hisham, Faculty of Manufacturing and Mechatronic Engineering Technology, University Malaysia Pahang, 26600, Pekan, Pahang, Malaysia

sakinahmh@umpsa.edu.my

Norazlianie Sazali, Faculty of Manufacturing and Mechatronic Engineering Technology, University Malaysia Pahang, 26600, Pekan, Pahang, Malaysia

Azlianie@umpsa.edu.my

Kumaran Kadirgama, Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia

kumaran@umpsa.edu.my

Devarajan Ramasamy, Faculty of Mechanical and Automotive Engineering Technology, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia

devarajan@umpsa.edu.my

Downloads

Published

2024-04-30

How to Cite

Sakinah Muhamad Hisham, Norazlianie Sazali, Kumaran Kadirgama, and Devarajan Ramasamy. 2024. “A Comprehensive Review on Tribological Behaviour of Hybrid Nanocellulose-CuO As Nanolubricant for Piston Ring Cylinder Liner Application”. Journal of Advanced Research in Micro and Nano Engineering 18 (1):60-77. https://doi.org/10.37934/armne.18.1.6077.
سرور مجازی ایران Decentralized Exchange

Issue

Section

Articles

Most read articles by the same author(s)

فروشگاه اینترنتی