Analysis of Temperature and Heat Measurement on Twophase Flow Nucleate Boiling with R-290 in Microchannel

Authors

  • Sentot Novianto Department of Research, Sekolah Tinggi Teknologi Texmaco, Subang, 41251, Indonesia
  • Raldi Artono Koestoer Departemen Teknik Mesin, Fakultas Teknik, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia
  • Agus Sunjarianto Pamitran Departemen Teknik Mesin, Fakultas Teknik, Universitas Indonesia, Kampus UI Depok, 16424, Indonesia

Keywords:

temperature, heat, measurement, two-phase, nucleate boiling, R-290, microchannel

Abstract

Research of two-phase flow boiling in microchannel has been done intensively. Microchannel has been increasingly applied in industrial equipment, especially for cooling system. Measurement of temperature and heat on the test section of microchannel became the main concern on this research. The aims of this research is to study a characteristic of temperature measurement and heat on two-phase flow boiling with R-290 in microchannels. The research method that is used including evaporative process at the test section with electrical heating. There are 10 type K thermocouple placed on the surface of test section and an immersed thermocouple to measure inlet and outlet temperature difference. In order to determine heat received and error, the statistical and mathematical approach were conducted. The average uncertainty of heat received on two-phase flow boiling was 0.05 Watt. Heat transfer coefficient of two-phase flow has been determined based on temperature measurement.

Downloads

Published

2020-12-14

How to Cite

Novianto, S. ., Koestoer, . R. A. ., & Pamitran, A. S. . (2020). Analysis of Temperature and Heat Measurement on Twophase Flow Nucleate Boiling with R-290 in Microchannel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54(1), 87–94. Retrieved from https://akademiabaru.com/submit/index.php/arfmts/article/view/2438

Issue

Section

Articles