Numerical Studies on Thermo-Hydraulic Characteristics of Turbulent Flow in a Tube with a Regularly Spaced Dimple on Twisted Tape
DOI:
https://doi.org/10.37934/cfdl.13.8.2031Keywords:
Finite volume method, Turbulent flow, Friction factor, convection heat transfer, Dimple twisted tapeAbstract
Heat transfer augmentation is an important concern due to the increase in heat management problems in thermal systems.
References
Seemawute, Panida, and Smith Eiamsa-Ard. "Thermohydraulics of turbulent flow through a round tube by a peripherally-cut twisted tape with an alternate axis." International Communications in Heat and Mass Transfer 37, no. 6 (2010): 652-659. https://doi.org/10.1016/j.icheatmasstransfer.2010.03.005
Liao, Q., and M. D. Xin. "Augmentation of convective heat transfer inside tubes with three-dimensional internal extended surfaces and twisted-tape inserts." Chemical Engineering Journal 78, no. 2-3 (2000): 95-105. https://doi.org/10.1016/S1385-8947(00)00134-0
Yadav, R. J., and Atuul S. Padalkar. "CFD analysis for heat transfer enhancement inside a circular tube with half-length upstream and half-length downstream twisted tape." Journal of Thermodynamics 2012 (2012). https://doi.org/10.1155/2012/580593
Chiu, Yu-Wei, and Jiin-Yuh Jang. "3D numerical and experimental analysis for thermal-hydraulic characteristics of air flow inside a circular tube with different tube inserts." Applied Thermal Engineering 29, no. 2-3 (2009): 250-258. https://doi.org/10.1016/j.applthermaleng.2008.02.030
Abed, Azher M., Hasan Sh Majdi, Zainab Hussein, Doaa Fadhil, and Ammar Abdulkadhim. "Numerical analysis of flow and heat transfer enhancement in a horizontal pipe with P-TT and V-Cut twisted tape." Case Studies in Thermal Engineering 12 (2018): 749-758. https://doi.org/10.1016/j.csite.2018.10.004
Eiamsa-Ard, Smith, K. Wongcharee, and S. Sripattanapipat. "3-D Numerical simulation of swirling flow and convective heat transfer in a circular tube induced by means of loose-fit twisted tapes." International Communications in Heat and Mass Transfer 36, no. 9 (2009): 947-955. https://doi.org/10.1016/j.icheatmasstransfer.2009.06.014
Promvonge, Pongjet, and Smith Eiamsa-Ard. "Heat transfer behaviors in a tube with combined conical-ring and twisted-tape insert." International Communications in Heat and Mass Transfer 34, no. 7 (2007): 849-859. https://doi.org/10.1016/j.icheatmasstransfer.2007.03.019
Chang, Shyy Woei, Tsun Lirng Yang, and Jin Shuen Liou. "Heat transfer and pressure drop in tube with broken twisted tape insert." Experimental Thermal and Fluid Science 32, no. 2 (2007): 489-501. https://doi.org/10.1016/j.expthermflusci.2007.06.002
Kumar, A., and B. N. Prasad. "Investigation of twisted tape inserted solar water heaters-heat transfer, friction factor and thermal performance results." Renewable Energy 19, no. 3 (2000): 379-398. https://doi.org/10.1016/S0960-1481(99)00061-0
Song, Si-hong, Qiang Liao, and Wei-dong Shen. "Laminar heat transfer and friction characteristics of microencapsulated phase change material slurry in a circular tube with twisted tape inserts." Applied Thermal Engineering 50, no. 1 (2013): 791-798. https://doi.org/10.1016/j.applthermaleng.2012.07.026
Salman, Sami D., Abdul Amir H. Kadhum, Mohd S. Takriff, and Abu Bakar Mohamad. "CFD analysis of heat transfer and friction factor characteristics in a circular tube fitted with quadrant-cut twisted tape inserts." Mathematical Problems in Engineering 2013 (2013). https://doi.org/10.1155/2013/273764
Eiamsa-ard, Smith, K. Wongcharee, P. Eiamsa-Ard, and C. Thianpong. "Heat transfer enhancement in a tube using delta-winglet twisted tape inserts." Applied Thermal Engineering 30, no. 4 (2010): 310-318. https://doi.org/10.1016/j.applthermaleng.2009.09.006
Sarviya, R. M., and Veeresh Fuskele. "Heat transfer and pressure drop in a circular tube fitted with twisted tape insert having continuous cut edges." Journal of Energy Storage 19 (2018): 10-14. https://doi.org/10.1016/j.est.2018.07.001
Ibrahim, E. Z. "Augmentation of laminar flow and heat transfer in flat tubes by means of helical screw-tape inserts." Energy Conversion and Management 52, no. 1 (2011): 250-257. https://doi.org/10.1016/j.enconman.2010.06.065
Eiamsa-Ard, Smith, and Pongjet Promvonge. "Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts." International Journal of Heat and Mass Transfer 53, no. 7-8 (2010): 1364-1372. https://doi.org/10.1016/j.ijheatmasstransfer.2009.12.023
Eiamsa-Ard, S., K. Wongcharee, P. Eiamsa-Ard, and C. Thianpong. "Thermohydraulic investigation of turbulent flow through a round tube equipped with twisted tapes consisting of centre wings and alternate-axes." Experimental Thermal and Fluid Science 34, no. 8 (2010): 1151-1161. https://doi.org/10.1016/j.expthermflusci.2010.04.004
Thianpong, C., P. Eiamsa-Ard, P. Promvonge, and S. Eiamsa-Ard. "Effect of perforated twisted-tapes with parallel wings on heat tansfer enhancement in a heat exchanger tube." Energy Procedia 14 (2012): 1117-1123. https://doi.org/10.1016/j.egypro.2011.12.1064
Hasanpour, A., M. Farhadi, and K. Sedighi. "A review study on twisted tape inserts on turbulent flow heat exchangers: The overall enhancement ratio criteria." International Communications in Heat and Mass Transfer 55 (2014): 53-62. https://doi.org/10.1016/j.icheatmasstransfer.2014.04.008
Maradiya, Chirag, Jeetendra Vadher, and Ramesh Agarwal. "The heat transfer enhancement techniques and their thermal performance factor." Beni-Suef University Journal of Basic and Applied Sciences 7, no. 1 (2018): 1-21. https://doi.org/10.1016/j.bjbas.2017.10.001
Vashistha, Chaitanya, Anil Kumar Patil, and Manoj Kumar. "Experimental investigation of heat transfer and pressure drop in a circular tube with multiple inserts." Applied Thermal Engineering 96 (2016): 117-129. https://doi.org/10.1016/j.applthermaleng.2015.11.077
García, A., J. P. Solano, P. G. Vicente, and A. Viedma. "The influence of artificial roughness shape on heat transfer enhancement: Corrugated tubes, dimpled tubes and wire coils." Applied Thermal Engineering 35 (2012): 196-201. https://doi.org/10.1016/j.applthermaleng.2011.10.030
Yuan, Wei, Guoyun Fang, Xiaoqing Zhang, Yong Tang, Zhenping Wan, and Shiwei Zhang. "Heat transfer and friction characteristics of turbulent flow through a circular tube with ball turbulators." Applied Sciences 8, no. 5 (2018): 776. https://doi.org/10.3390/app8050776
Wijayanta, Agung Tri, Pranowo,, Mirmanto, Budi Kristiawan, and Muhammad Aziz. "Internal flow in an enhanced tube having square-cut twisted tape insert." Energies 12 (2019): 306. https://doi.org/10.3390/en12020306
Juera-ong, Panupong, Nioh Puzu, and Chayut Nuntadusit. "Experiment Study on Heat Transfer and Flow Structure of The Single Row Circular Orifice Jets Injecting into Turbulent Boundary Layer." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 78, no. 2 (2021): 47-55.
Japar, Wan Mohd Arif Aziz, Nor Azwadi Che Sidik, Natrah Kamaruzaman, Yutaka Asako, and Nura Mu'az Muhammad. "Hydrothermal performance in the Hydrodynamic Entrance Region of Rectangular Microchannel Heat Sink." Journal of Advanced Research in Numerical Heat Transfer 1, no. 1 (2020): 22-31.
Yusof, Nur Syamila, Siti Khuzaimah Soid, Mohd Rijal Illias, Ahmad Sukri Abd Aziz, and Nor Ain Azeany Mohd Nasir. "Radiative Boundary Layer Flow of Casson Fluid Over an Exponentially Permeable Slippery Riga Plate with Viscous Dissipation." Journal of Advanced Research in Applied Sciences and Engineering Technology 21, no. 1 (2020): 41-51. https://doi.org/10.37934/araset.21.1.4151
Harish, H. V., K. Manjunath, and T. Rangaswamy. "Numerical Analysis of Flow and Heat Transfer Enhancement in A Horizontal Pipe with Plain and Dimple Twisted Tape." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 82, no. 2 (2021): 106-119. https://doi.org/10.37934/arfmts.82.2.106119
