Enhancing Mild Steel Surface Characteristics through Electrical Discharge Coating with Titanium Dioxide Suspension

Authors

  • Pay Jun Liew Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Nurnabihah Najaa Mustapa Kamil Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Intan Sharhida Othman Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Mohd Shukor Salleh Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Jingsi Wang Marine Engineering College, Dalian Maritime University, 1 Linghai Road, Ganjingzi District, Dalian 116026, People's Republic of China

DOI:

https://doi.org/10.37934/armne.22.1.94102

Keywords:

Electrical discharge coating (EDC), mild steel, titanium dioxide, surface roughness, material deposition

Abstract

In this research, surface modification of mild steel was carried out by using electric discharge coating (EDC) with titanium dioxide (TiO2) powder suspension. The concentrations of TiO2 powder were varied and their effect on the surface roughness and deposited element were investigated. The results showed that elements such as titanium, carbon, copper, oxygen, zinc and iron were successfully coated on the mild steel surface. Aside from that, the weight % of the titanium element increased with an increase of TiO2 powder concentration. The surface roughness was also reduced 62.9% by using 5 g/l TiO2 powder when compared to the pure kerosene oil.

Author Biographies

Pay Jun Liew, Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

payjun@utem.edu.my

Nurnabihah Najaa Mustapa Kamil, Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

nabihahnajaa98@gmail.com

Intan Sharhida Othman, Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

intan_sharhida@utem.edu.my

Mohd Shukor Salleh, Fakulti Teknologi dan Kejuruteraan Industri dan Pembuatan, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

shukor@utem.edu.my

Jingsi Wang, Marine Engineering College, Dalian Maritime University, 1 Linghai Road, Ganjingzi District, Dalian 116026, People's Republic of China

wjs@dlmu.edu.cn

Downloads

Published

2024-08-27

How to Cite

Liew, Pay Jun, Nurnabihah Najaa Mustapa Kamil, Intan Sharhida Othman, Mohd Shukor Salleh, and Jingsi Wang. 2024. “Enhancing Mild Steel Surface Characteristics through Electrical Discharge Coating With Titanium Dioxide Suspension”. Journal of Advanced Research in Micro and Nano Engineering 22 (1):94-102. https://doi.org/10.37934/armne.22.1.94102.
سرور مجازی ایران Decentralized Exchange

Issue

Section

Articles

Most read articles by the same author(s)

فروشگاه اینترنتی