Tensile Properties for MWCNT Filled Jute-Epoxy Composites

Authors

  • Fauzan Ahmad Malaysian-Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia
  • Siti Nadia Mohd Bakhori UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia
  • Siti Nur Fatin Zuikafly Malaysian-Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia
  • Mohamad Zaki Hassan UTM Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100 Kuala Lumpur, Malaysia

Keywords:

tensile strength, MWCNT, jute fiber, composites

Abstract

This paper presents the tensile properties of jute-epoxy composite laminates with different weight percentage of multi-walled carbon nanotube (MWCNT). The jute fibre and epoxy resin that dispersed with MWCNT were used. The composite laminates were prepared by hand lay-up technique. Tensile test according to ASTM D3039 was carried out to obtain the tensile properties of the composite laminates. Three different weight percentages of MWCNT filled jute-epoxy were tested in this study. The experimental result found that the maximum tensile properties were recorded at 3% of MWCNT filler.

Downloads

Published

2020-11-01

How to Cite

Ahmad, . F. ., Mohd Bakhori , S. N. ., Zuikafly, . S. N. F. ., & Hassan, M. Z. . (2020). Tensile Properties for MWCNT Filled Jute-Epoxy Composites . Journal of Advanced Research in Applied Mechanics, 31(1), 16–21. Retrieved from https://akademiabaru.com/submit/index.php/aram/article/view/1782
سرور مجازی ایران Decentralized Exchange

Issue

Vol. 31 No. 1: March (2017)

Section

Articles
فروشگاه اینترنتی