Design of PID Control System Assisted using LabVIEW in Biomedical Application

N.  Arsad; N. H.  Ariffin

Design of PID Control System Assisted using LabVIEW in Biomedical Application

Authors

N. Arsad Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
N. H. Ariffin Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia

Keywords:

temperature, control system, proportional, integral, derivative, labview

Abstract

Temperature variation of modern incubator produced inaccuracy and aging. This causes problem in maintaining temperature at a required level. Thus, overheating will damaging and interrupt data under measured. In order to maintain the temperature at a require level, an economical and reliable of a Proportional, Integral and Derivative (PID) acquisition control system assisted using LabVIEW has been developed. The PID acquisition control system uses feedback from the temperature sensor to calculate and vary converted voltage to heat a heating element at a required level. Results show that, the PID acquisition control system able to control the temperature at the required level of 38 °C.

Downloads

PDF ³²

Published

2020-10-31

How to Cite

Arsad, N. ., & Ariffin, N. H. . (2020). Design of PID Control System Assisted using LabVIEW in Biomedical Application. Journal of Advanced Research in Applied Mechanics, 15(1), 1–9. Retrieved from https://akademiabaru.com/submit/index.php/aram/article/view/1741