Numerical Modelling of Synthetic-Jet-Assisted Mixing

Authors

  • Hong Mun Hoh Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Cheng See Yuan Centre for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia
  • Lim Kim Chuan Center for Telecommunication Research & Innovation, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia

Keywords:

numerical modelling, synthetic jet, mixing application

Abstract

The aim of the present study is to develop a Computational Fluid Dynamics (CFD) model of synthetic-jet-assisted fluid mixer. A geometric model which consists of a mixing channel with a pair of synthetic jet actuators was created. The diaphragm motion of the synthetic jet actuators was realized by a moving mesh method. Dye solution and water were introduced into the fluid mixer from two different inlets. Mixing degree was numerically predicted as the result of the CFD model. Verifications were performed to examine the sensitivity of the model to temporal and spatial resolutions. The results were validated against experimental data and a good agreement was achieved. The overall results indicated that the time-step size affected the mixing degree significantly. The mesh resolution only has slight influence on the mixing degree.

Published

2021-07-05
فروشگاه اینترنتی