Effect of Turbulence Intensity on Turning Diffuser Performance at Various Angle of Turns

Authors

  • Lim Gim Huang Centre for Energy and Industrial Environment Studies, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Normayati Nordin Centre for Energy and Industrial Environment Studies, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Lim Chia Chun Centre for Energy and Industrial Environment Studies, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Nur Shafiqah Abdul Rahim Centre for Energy and Industrial Environment Studies, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Shamsuri Mohamed Rasidi Centre for Energy and Industrial Environment Studies, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia
  • Muhammad Zahid Firdaus Shariff Centre for Energy and Industrial Environment Studies, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Parit Raja, Johor, Malaysia

Keywords:

3-D turning diffuser, turbulence intensity, pressure recovery coefficient, flow uniformity, Computational Fluid Dynamics (CFD)

Abstract

The performances of turning diffuser are highly affected due to the nature of its geometries by the existence of flow separation and dispersion of core and secondary flows. Turning diffusers with potential turbulence intensity may lead to optimum performance. However, there has been yet insufficient literature on 3-D turning diffuser fluid flow performance analysis by varying inlet turbulence intensity. Hence, this study aims to investigate the effect of turbulence intensity on 30o and 90o 3-D turning diffuser performances. The performances of turning diffusers were scientifically evaluated in term of pressure recovery coefficient, Cp and flow uniformity index, ?out while turbulence intensity was varied from 1.5% to 7.5%. This work involved both numerical and experimental methods. ANSYS Computational Fluid Dynamics (CFD) was used for the simulation and Particle Image Velocimetry (PIV) for the experiment. The inlet free-stream turbulence intensity was varied which imposed on the flow by suppressing the separation of the inner wall boundary layer and mixing to provide optimum uniformity of the flow. The pressure recovery increased 8.02% and 9.74% while the flow uniformity improved about 2.95% and 1.60% in 30° case and 90° case respectively. In conclusion, the 7.5% of turbulence intensity is promising to introduce in the ducting flow application so as to improve the pressure recovery and the flow uniformity of both 30° and 90° turning diffuser cases.

Downloads

Published

2021-01-16

How to Cite

Gim Huang, L. ., Nordin, N. ., Chia Chun, L. ., Abdul Rahim, N. S. ., Mohamed Rasidi, S. ., & Firdaus Shariff, M. Z. . (2021). Effect of Turbulence Intensity on Turning Diffuser Performance at Various Angle of Turns. CFD Letters, 12(1), 48–61. Retrieved from https://www.akademiabaru.com/submit/index.php/cfdl/article/view/3130
سرور مجازی ایران Decentralized Exchange

Issue

Section

Articles

Most read articles by the same author(s)

Similar Articles

You may also start an advanced similarity search for this article.

فروشگاه اینترنتی